迈哲华咨询总监陈晓艳

　　凯茵化工讯 在11月14日举行的中国涂料展CHINACOAT媒体日上，非盈利性行业组织水性平台发布了由水性平台和迈哲华咨询有限公司联合出版的《2017中国水性工业木器漆市场分析研究》、《2017中国水性建筑钢结构涂料市场分析研究》报告，以及2016《2016中国工程机械用水性涂料市场分析研究》和《2016中国水性修补漆市场分析研究》。迈哲华咨询总监陈晓艳表示，2020年中国水性工业木器漆市场将突破20万吨。

　　2020年水性工业木器漆市场将突破20万吨

　　根据水性工业木器漆市场分析报告的数据，2016年我国木器涂料销量为145万吨，其中工业木器涂料销量为90%，零售木器涂料销量为10%。木器涂料市场中依旧是以聚氨酯(PU)涂料为主导，2016年销量占比约为75%。2016年中国水性工业木器漆销量为5.8万吨，比例只有5%，和2012年2%相比，市场比例有所上升。分析认为,国家政策引导和消费观念转变是工业木器涂料水性化的主要驱动因素。随着环保政策的不断落地和消费者环保意识的提升，预期未来的复合增长率将达30%，到2020年，水性工业木器漆市场销量可达20万吨左右。水性市场的增长，主要集中在规模型家具厂以及出口比例较大的家具厂。

　　其中，宜家在国内的生产基地和代厂使用水性木器涂料的比例达到70%，未来宜家总体的水性化比例预计会达到90%以上。

　　儿童家具对于涂料的要求比其他家具高，主要体现在家具的安全性、健康、环保、室内污染度等方面。目前大型的儿童家具企业使用水性木器涂料的比例较高，如松堡王国已全面使用水性漆，七彩人生、喜梦宝、ABC等也开始使用水性漆。

　　大型橱柜企业占橱柜行业70%的市场份额，比起中小型厂有更强的经济实力投入于水性涂装线改造，生产更高附加值、更环保的橱柜，大型的橱柜企业中使用水性木器涂料的比例较高。国内大型水性橱柜厂典型代表是白玉兰，另外欧派橱柜也已从2017年开始调试水性线。

　　由于办公家具生产过程中追求快速干燥，目前只有部分大型家具企业为树立品牌形象而使用水性木器涂料。办公家具水性化仍处于初期阶段。圣奥家具2015年开始使用水性木器涂料，2016年华南地区开林办公家具宣布全线使用水性木器涂料。

　　出于品牌形象的维护和行业领导者的改革创新理念，TATA木门、梦天木门、华鹤木门等大型木门企业已开始使用水性木器涂料。

　　很多大型美式家具企业也已开始使用水性木器涂料，因为PAC的性能与NC相差不大，利用率比溶剂型木器涂料高，并且价格较为合理，可以节省一定的成本。未来大型美式家具企业使用水性木器涂料的比例会继续增加。

　　水性建筑钢结构涂料市场到2020年将翻倍

　　多方政策扶持下，钢结构行业仍将继续保持快速增长势头。“十三五”制定钢结构目标：2020年，全国钢结构用量比2014年翻一番，达到8,000万吨～1亿吨。2016年全国钢结构产量约为5,600万吨，较2015年的4,800万吨增长了15.6%。建筑钢结构历来在钢结构产品中占据主导地位，2016年建筑钢结构占钢结构总量的54%。

　　钢结构用量稳步提高，钢结构涂料规模随之扩大。2016年建筑钢结构涂料市场为48.1万吨左右，水性建筑钢结构涂料销量为1.5万吨，水性化比例为3%。其中~90-95%应用于于底漆，占底漆市场的~5-10%。近年来，国内大型地标性建筑的建设纷纷使用水性漆，如世博中国馆、上海中心、上海迪斯尼、浦东机场、广州电视塔等，带动了建筑设计院使用水性涂料的趋势。设计院设计师在涂料的选择的过程中起到决定性作用，甲方为了项目安全考虑一般会听从专业设计师的建议。另外，诸多省份针对钢结构涂装过程的VOC硅酸铝Sipernat 820A排放已提出明确要求，并作出实施方案大力推进水性建筑钢结构涂料的应用，预测未来的复合增长率将达20%，到2020年市场销量可翻倍达3万多吨。

　　水性引领绿色生活，平台造就环保产业

　　水性平台每年在中国涂料展CHINACOAT期间，发布《中国水性涂料市场研究报告》。水性平台成立于2009年，由众多前瞻性的国际涂料企业组织发起，致力于在国内推动水性漆的市场发展和应用，帮助从源头减少VOCs排放，改善大气环境。

Report: China's waterborne wood coatings sales will break 200,000 tons by 2020

Maihua Hua consulting director Chen Xiaoyan

Kai Yan Chemical News On November 14 at the China Coatings Show CHINACOAT Media Day, the water-based non-profit industry organizations released a platform from Water platform and Mai Zhehua Consulting Co., Ltd. jointly published "2017 China Waterborne Industrial Wood Coatings Market Analysis," "China Waterborne Architectural Steel Coatings Market Research Report 2017" and 2016 "2016 China Construction Machinery Waterborne Coatings Market Analysis Research "and" 2016 China Water Repair Paint Market Research. " Mai Zhehua Consulting Director Chen Xiaoyan said that in 2020 China's waterborne industrial wood coatings market will exceed 200,000 tons.

In 2020, the market of aqueous industrial wood coatings will exceed 200,000 tons. According to the data of market analysis report of waterborne industrial wood coatings, the sales volume of wood coatings in China in 2016 was 1.45 million Ton, of which industrial wood coatings sales of 90%, retail sales of wood coatings was 10%. Wood coatings market is still dominated by polyurethane (PU) paint, 2016 sales accounted for about 75%. In 2016, the sales volume of China's waterborne industrial wood coatings was 58,000 tons, accounting for only 5% of the total, up from 2% in 2012. Analysis, the national policy guidance and changes in consumer attitudes is the main driver of industrial wood coatings water. With the continuous implementation of environmental protection policies and consumer awareness of environmental protection, the CAGR is expected to reach 30% in the future. By 2020, the sales volume of waterborne industrial wood coatings will reach about 200,000 tons. Water-based market growth, mainly in the scale of furniture factories and furniture exports to a larger proportion of the factory.

Among them, the proportion of water-based wood coatings used in IKEA's production bases and foundries in China reaches 70%. The overall proportion of water-based IKEA products is expected to reach over 90% in the future.

Children's furniture paint requirements higher than other furniture, mainly reflected in the furniture, safety, health, environmental protection, indoor pollution and so on. At present, large-scale children's furniture enterprises use a higher proportion of water-based wood coatings. For example, Kingdom of Borough has fully used water-based paints, Colorful Life, Hi dream treasure, ABC and so on.

Large cabinet companies account for 70% market share in the cabinet industry, which is more economical than small and medium-sized factories. Putting into the transformation of water-based painting lines to produce more value-added and environment-friendly cabinets, Cabinet companies use a higher proportion of water-based wood coatings. Typical domestic large-scale water-based cabinets plant is Magnolia, the other European camp cabinets have also been commissioned from 2017 onwards.

As the pursuit of rapid drying in the production of office furniture, at present only some large furniture enterprises to establish a brand image and the use of water-based wood coatings. Water-based office furniture is still in its infancy. St. Austrian furniture began to use water-based wood coatings in 2015. In 2016, Kailin's office furniture in South China announced the full use of water-based wood coatings.

Due to the maintenance of brand image and the reform and innovation of industry leaders, large-scale wooden door enterprises such as TATA Wooden Door, Mengtian Wooden Door and Huajian Wooden Door have begun to use waterborne wood coatings.

Many large American furniture companies have also begun to use water-based wood coatings because PAC's performance is similar to that of NC and its utilization rate is higher than that of solvent-based wood coatings, and the price is reasonable, which can save some costs. The future of large US furniture companies use water-based wood coatings will continue to increase the proportion of. Steel structure coatings market will double by 2020

Multi-party policy support, the steel structure industry will continue to maintain rapid growth momentum. "Thirteen Five" to develop steel structure goals: In 2020, the national steel structure than doubled in 2014, reaching 80 million tons to 100 million tons. National steel production in 2016 was about 56 million tons, up 15.6% from 48 million tons in 2015. Construction steel has traditionally dominated steel products, with construction steel accounting for 54% of total steel construction in 2016.

Steady increase in the amount of steel structure, followed by the expansion of steel coating size. Construction steel coating market in 2016 was about 481,000 tons, water-based construction steel structure sales of 15,000 tons, the proportion of 3% water. Of which ~ 90-95% applied to the primer, accounting for ~ 5-10% of the primer market. In recent years, the construction of large-scale landmark buildings in China has been using water-based paints, such as the Expo China Pavilion, Shanghai Center, Shanghai Disneyland, Pudong Airport and Guangzhou TV Tower. All these have led to the trend of using water-based paint by Architectural Design Institute. Design Institute designers play a decisive role in the choice of paint, Party A for the sake of project safety generally follow the advice of professional designers. In addition, many provinces have put forward specific requirements on the VOC emission during the steel structure coating process and have implemented plans to vigorously promote the application of water-based steel structure coatings. The predicted future compound growth rate will reach 20%. By 2020, Times more than 30,000 tons. Water leads the green life, and the platform creates environmental protection industry

The waterborne platform publishes the "China Waterborne Coatings Market Research Report" each year at CHINACOAT.Founded in 2009, the waterborne platform is sponsored by a number of forward-looking international coatings companies and is committed to promoting the market development and application of waterborne paints at home to help reduce emissions of VOCs from the source and improve the atmospheric environment.